• Uses standard and priority cellular telephone services available nationwide.
• Compatible with most DSC security systems including: - PC1500, PC1550 (v4.0 Software), PC1575 (v1.0 software) - PC2525 (v1.0 software), PC2550 (v1.2 & newer software) - PC3000 (v7.6 & newer software), PC4010, PC4020 (all versions) -PC4020KT (all versions), PC5010 (v1.0 & newer software) -PC1555 & PC580 (all versions), PC 5015 (all versions)
• Battery back-up to A.C. power
• Registration format eliminates the possibility of ESN theft
• On-board signal strength indicator
• Auxiliary input trigger - for automatic in-house phone connection to a preprogrammed phone number.-connect any in house phone onto cellular network
• Jumper selection for DC power operationideal for commercial trucks, buses, boats and RV’S
• Self monitoring of: - loss of A.C. power, battery fault, cellular communication and tampering
• Programmable with Sur- Gard Links1000 PGM v1.4 : - cellular telephone number, home access I.D. and initial paging channel

• Local cellular telephone network
• Frequency Range: 880 MHz to 889 MHz
• Supports all control panel communication features.

• Current with no A.C.: 1.1A transmitting 210 mA not transmitting
• Current with A.C.: 280mA battery charged 680mA battery under charge 1.15 A tranmitting
• RF power output: 3.0 Watts max.
• Battery: 12 V 4 Ah rechargeable sealed battery
• Transformer: 16.5 VAC, 40VA

• 3 -5dB gain, TNC connector, cabinet or remote control
• Extension kits available: LAE- 33 foot antenna kit, LAE-1515 foot antenna kit, LAE-25 25 foot antenna kit

• 11” x 11.8” x 3.3” (279 x 300 x 84mm)

• 6.5 lbs. (3 Kg)

Features

• Uses Wireless Cellemetry Network where available
• Simple four wire keybus connection
• Compatible with: DSC PC5010 software version v1.XX; v2.02 DSC PC1555 software version v2.XX DSC PC580 (all version) DSC PC5015 software version v1.XX; v2.2X
• Provides full event reporting through keybus connection
• Module transmits event conditions in less than a second
• Module mounts into existing control panel cabinet
• Powered from the control panel, preventing the use of an additional transformer and an additional battery
• Full status from built-in LED's - Signal strength indicator maximum signal strength good signal strength acceptable signal strength - Transmit/Receive status - Transceiver status normal operation modem not responding module not connected fail to communicate
• Fully programmable via control panel keypad

Installation

• Module mounts at top right corner or bottom left corner of existing control panel cabinet.
• Antenna through knockout
• Antenna can be remotely located using available extension kits
• Module can be remotely located up to 1000 feet from the control via keybus connection

• Expandable to 14 lines
• 92 communication formats
• Caller ID
• Built-in audio
• 256 event memory per line
• Parallel & Serial outputs
• Downlook® video compatible

• 2 digital lines
• 256 event memory per line
• Expands MLR2 to 14 lines
• 92 communication formats including: Contact ID, SIA, BFSK, ITI, SIA Level 1, 2, 3, 8, 20, Ademco Contact ID, Radionics, Silent Knight FSK
• Caller ID

• 19" Rack Mount
• Holds 2 DRL2A receiver modules

• 19" rack mount
• Holds 4 - MLRV-A receiver module’s

• 19" rack mount
• Holds 2 - MLRV-A modules and 1 DRL2A module

• CSX 2 line desk mount Non U.L.
• CS.6 line desk mount U.L.
• RCM.14 line desk mount U.L.
• CL.14 line floor mount U.L. (shown)

• CPM2............central processor module
• DRL2A ........2-line digital module
• DML2A........backplane circuit board
• DML4 ..........backplane circuit board
• MCBL............telephone connection cable
• CH6UF2 ......power ribbon cable
• CH6UF3 ......data bus ribbon cable